BULOVA watches are known for their precision, innovation, and distinctive designs. Understanding the TPD (Turns Per Day) and winding direction is crucial for maintaining these automatic timepieces. Here's a comprehensive guide for various BULOVA models:

Most modern BULOVA automatic watches have a standard TPD range of 650-800 and use bidirectional winding. This is due to BULOVA's use of reliable automatic movements, often based on Japanese or Swiss calibers.

When using a watch winder for your BULOVA, it's generally recommended to start with 650 TPD and adjust up to 800 TPD if needed, always with bidirectional rotation to maintain optimal performance. The bidirectional setting allows the watch to wind in both clockwise and counterclockwise directions, mimicking the natural movement of the wrist.

Experimenting with TPD Settings

If you're unsure about the specific TPD setting for your BULOVA watch or want to fine-tune its performance, you can experiment with different settings. Here's a step-by-step guide to help you find the optimal TPD for your BULOVA:

1. Start by manually winding your watch. Turn the crown 20 to 30 times to ensure it's fully wound.
2. Place your watch in the winder and set it to the lowest TPD setting (650 for BULOVA watches) with bidirectional rotation.
3. Run the winder for 48 hours, periodically checking if the watch is keeping accurate time.
4. If the watch is still keeping accurate time after two days, you've found the right setting.
5. If the watch is losing time, increase the TPD setting slightly (e.g., to 750) and repeat the 48-hour test.
6. Continue adjusting and testing until you find the lowest TPD setting that keeps your watch running accurately, not exceeding 800 TPD.

Remember that BULOVA watches typically have a power reserve of about 40-42 hours, depending on the movement used. If your watch is still running accurately after 48 hours on the winder, it indicates that the winder is providing sufficient turns to keep the mainspring wound.

Additional Considerations

While experimenting with TPD settings can help you find the optimal winding for your BULOVA, keep these points in mind:

• Over-winding is generally not a concern with modern BULOVA watches, as they have built-in mechanisms to prevent damage from excessive winding.
• If you wear your watch regularly, you may not need to keep it on a winder constantly. Winders are most useful for watches that aren't worn daily.
• The natural movement of your wrist while wearing the watch is still the best method for keeping it wound and running accurately.
• BULOVA uses various movements in their watches, including Miyota and Sellita calibers. While the general TPD range is similar, there might be slight variations based on the specific movement in your watch.
• Some BULOVA models, especially those with complications or specific movements, may have slightly different winding requirements. Always refer to your watch's manual for precise instructions.

For more detailed information on watch winder settings and recommendations, you can refer to our comprehensive guide: Watch Winder Settings Guide: Recommended Turns Per Day (TPD).

Remember, while using a watch winder can be convenient, it's also beneficial to wear your BULOVA regularly. The natural movement of your wrist provides the best winding for your timepiece and allows you to enjoy its precision and distinctive design fully.

Always consult your watch's specific manual or contact BULOVA customer service for the best care instructions for your particular model, especially if you have a limited edition or a watch with special features.