TUDOR watches are renowned for their robust build quality, precision, and heritage-inspired designs. Understanding the TPD (Turns Per Day) and winding direction is crucial for maintaining these luxury automatic timepieces. Here's a comprehensive guide for various TUDOR models:

Most modern TUDOR automatic watches have a standard TPD of 650 and use bidirectional winding. This is due to TUDOR's use of high-quality movements, including their in-house calibers and modified ETA movements.

When using a watch winder for your TUDOR, it's generally recommended to set it to 650 TPD with bidirectional rotation to maintain optimal performance. The bidirectional setting allows the watch to wind in both clockwise and counterclockwise directions, mimicking the natural movement of the wrist.

Experimenting with TPD Settings

If you're unsure about the specific TPD setting for your TUDOR watch or want to fine-tune its performance, you can experiment with different settings. Here's a step-by-step guide to help you find the optimal TPD for your TUDOR:

1. Start by manually winding your watch. Turn the crown 20 to 30 times to ensure it's fully wound.
2. Place your watch in the winder and set it to 650 TPD with bidirectional rotation.
3. Run the winder for 48 hours, periodically checking if the watch is keeping accurate time.
4. If the watch is still keeping accurate time after two days, you've found the right setting.
5. If the watch is losing time, increase the TPD setting slightly (e.g., to 750) and repeat the 48-hour test.
6. Continue adjusting and testing until you find the lowest TPD setting that keeps your watch running accurately.

Remember that TUDOR watches typically have a power reserve of about 70 hours for models with in-house movements, and around 38-40 hours for those with modified ETA movements. If your watch is still running accurately after 48 hours on the winder, it indicates that the winder is providing sufficient turns to keep the mainspring wound.

Additional Considerations

While experimenting with TPD settings can help you find the optimal winding for your TUDOR, keep these points in mind:

• Over-winding is generally not a concern with modern TUDOR watches, as they have built-in mechanisms to prevent damage from excessive winding.
• If you wear your watch regularly, you may not need to keep it on a winder constantly. Winders are most useful for watches that aren't worn daily.
• The natural movement of your wrist while wearing the watch is still the best method for keeping it wound and running accurately.
• Some TUDOR models, especially those with in-house movements, may have specific winding requirements. Always refer to your watch's manual for precise instructions.

For more detailed information on watch winder settings and recommendations, you can refer to our comprehensive guide: Watch Winder Settings Guide: Recommended Turns Per Day (TPD).

Remember, while using a watch winder can be convenient, it's also beneficial to wear your TUDOR regularly. The natural movement of your wrist provides the best winding for your timepiece and allows you to enjoy its craftsmanship fully.

Always consult your watch's specific manual or a professional watchmaker for the best care instructions for your particular TUDOR model, especially if you have a vintage piece or a watch with complex complications.